Android Things Projects
上QQ阅读APP看书,第一时间看更新

Testing the installation

Once we have flashed the Android Things image into the SD card, we can remove it from the PC or Mac and insert it into the board:

  1. Connect Raspberry Pi to a video using the HDMI.
  2. Connect Raspberry Pi to your network using the LAN connection.
  3. Connect Raspberry Pi to your Mac/PC using a USB cable.

Wait until Android Things completes the boot phase. At the end, you should see the following:

Now your development board is ready and we can start developing our first Android Things project. To confirm that your Android Things is up and running, you can execute from the command line the following command:

adb devices

You should see, in the list, at least one Android device with an IP address. Congratulations; you have just installed and tested your Android Things OS. By now you should see the Android Things default screen because we did not install an app on the system.